INDUSTRIAL SEWING MACHINES
Industrial machines are sometimes priced "KD" - shipped "knocked down" unless otherwise specified.  The steel legs must be assembled, the table top attached, the motor, thread tree, bobbin winder, drawer and light fixture installed.  The motor belt needs to be installed and the belt tension adjusted.  The price is determined by the accessories that may or may not be included.  Table can be shipped assembled for a premium.  (Pictured w/ optional stich counter and needle stop)
$1699 includes setup and delivery!
Sign InView Entries
Artisan 618-1 SC (safety clutch):  $1699 + FREIGHT
618-1 SC LTHR:  $1699
Compound Needle Feed Walking Foot Sewing Machine (Unison Feed), with Big Bobbin, and Reverse Feed  Lockstitch Sewing Machine with a Big "M" size Bobbin and Rotating Hook, (end loading mechanism), Dial operated stitch length regulator, Reverse feed lever, semi-automatic Lubrication and sews up to 7/16" thicknesses.  The power stand includes adjustable "T" style steel legs, an ACF-622 Electronic A.C. Servo Motor, thread tree, LED low voltage lamp, drawer and accessories.
Features:
  • Walking foot machine with standard interchangeable 111W presser feet.
  • Large rotary hook and "M" size big bobbin.
  • Forward and reverse.
  • Manual lubrication with oil reservoir to lubricate the rotating hook.
  • Extremely quiet and reliable operation.
  • Extremely long maximum stitch length: 2.5 stitches/inch.
Needle System:  135 X 17, 14-24.
Needle System for Leather: 135 x 16 TRI, sizes 14 - 24.  Uses up to size 207 Thread.
707-224-2922
618-1SC
797 AB-8001
A100-2
206RB-1
DNU-1541S





















2477 SOLANO AVERussell Moore - Webmaster and
NAPA, CA  94558Owner of Napa Sew & Vac
707-224-2922



K-leg stand
MACHINE OF THE MONTH - ARTISAN 618SC @ $1699
ARTISAN 618-1SC
$1699
Assembled
Artisan N-4 H NS
$1499
NP-10 H NS
TORO-LS 1020
AK-20
Artisan 4420 RB
YAMATA 618
BARRACUDA 2000U-33
$599
Juki LU 1508N
$2599 w/ power stand

Welting feet:  1/8" to 1/2" set's $ 29.95, outside only $19.95 L/R zipper feet $19.95

New Juki DNU1181 1-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity Hook, Walking foot machine @ $1499.00
With its strong top and bottom feed mechanism, the machine insures the smooth feeding of hard-to-feed materials or multilayered sections of materials to achieve consistent seam quality that is free from irregular stitch pitches. The automatic lubricating mechanism dramatically improves maintainability of the machine.  This machine is equipped with a powerstand and servo motor.






Left, you can see the DNU1181 walking foot mechanism.  Visit the Juki site for video clip: http://www.juki.co.jp/industrial_e/products_e/leather_e/plain_e/du1181n.html
Artisan AK-20 @ $1950 + Freight
14" wide Belt and Strap Cutting Machine. The AK-20 is adjustable to cut widths of leather from strings of 2 mm wide up to 14" in width. By changing the spacers between the knives, various widths of leather strings or strap goods are cut from whole hides. Eight set of blades are normally included with additional spacers included in the accessory kit.The Complete machine from artisan includes our CRS-2500 Continuous Running Motor Stand Drive Unit with heavy duty adjustable double "T" style steel legs, large heavy duty Locking Caster Wheels, a drawer and accessories are always included. A reversible servo motor is optional.
Optional:  Additional knive blades are available @ $304 per set.
Artisan TORO-LS 1020 @ $2350 + Freight
20" Stationary Knife Leather Splitter. The artisan LS-1020 splitter will level or split vegetable tanned leathers from about 4oz up to about 15/16 oz. Using various adjustments your leather can first be "leveled", or then the leather can be split into almost any desired weight even down to light weight lining leathers sometimes in just one pass. The machine is powerful enough to split any length of heavy vegetable tanned leathers up to 20" wide. We've designed the LS-1020 to be operated by hand or by the powerful included electronic servo motor system.Each complete machine from artisan includes our exclusive ACF series reversible Electronic Servo Motor Stand Drive Unit with adjustable double "T" style steel legs, Locking Caster Wheels, a drawer and an accessory kit. The high quality cutting blade is easy to strop back to a fine cutting edge and when the blade does require re-sharpening, Artisan can have it done very economically.Optional additional knife blades are available.
Artisan NP-10 H NS @ $1945 + Freight
The NP-10 H is a Heavy Duty Top and Bottom Feed bell knife skiving machine designed to bevel the edges of heavier weight leather hides . Included with the machine is a built-in bell knife sharpening system and three speed adjustable speed transmission.The Complete machine from artisan includes our exclusive ACF-622 Electronic A.C. Servo Motor Stand Drive Unit with a plywood table top, adjustable "T" style steel legs, a drawer and accessories.
Picture Features NIPPY model with custom chute.
Skiver Power Stand priced separately is $499 KD plus freight to your destination.  Skiver tables for sale are similar but have narrower chutes. Wider chutes can be commissioned by your local sheet metal shop or the narrower chutes can be split and modified.
Artisan NP- 4 H NS Skiving Machine Complete $1295 + Freight
The NP- 4 H is a Heavy Duty standard bell knife skiving machine designed to bevel the edges of leather hides and rubber. Included with the machine is a built-in bell knife sharpening system and an adjustable speed transmission.The Complete machine from artisan includes our exclusive ACF-622 Electronic A.C. Servo Motor Stand Drive Unit with a plywood table top, adjustable "T" style steel legs, a drawer and accessories.
ÜBERLIGHT 9000C @ $99.95
SMD LED TASK LIGHT:  A NEW GENERATION OF LED LIGHTING.  BRIGHT AND BRIGHTER!
Two easy to reach light settings. Choose the brightness that is best for the task at hand. 2-5W (200-500 lumens). On/off switch on the base.  28 SMD-LED TASK LIGHT
Our new 9000C light fixture uses 28 SMD-LEDs (surface mount and light emitting diodes) and advanced circuitry to produce a natural bright light that is easy on the eyes and reproduces colors as they truly are.  UP TO 60,000 HOURS OF USE.
LEDs are the most efficient and lowest cost to operate lighting available. The 9000 series are rated for up to 60,000 hours of use.
FEATURES:
2W and 5W brightness settings
  • Honeycomb anti-glare lens
  • Built-in on/off switch
  • C-clamp with 4.5 cm opening
  • 66 cm long metal shield tubing
  • Heavy-duty swivel joint
  • cETLus Approved
RELIABLE C88 POWERFUL VACUUM MOTOR @ $599

Pressing on a regular ironing board eventually leads to a damp ironing surface, making it impossible to get a clean, crisp finish for your garments. The C88 with professional grade vacuum provides the user with the same tools that professionals count on.

The secret to great finishing is to keep the ironing table dry by removing steam from the fabric. The powerful vacuum motor on the C88 does this quickly and efficiently. Great for dress shirts, pants, skirts jackets and more.

FEATURES:
• Usable from either side of the table
• Height adjustable - 30.5” - 38.5”
• Quick-Dry textured polyester cover set
• 16" x 48.5" pressing dimensions
Reliable C88
$599
RELIABLE C81 Vacuum Board @ $499
w/ VACUUM & UP AIR FUNCTIONS

Pressing on a regular ironing board eventually leads to a damp ironing surface, making it impossible to get a clean, crisp finish for your garments. The C81 with vacuum and up-air provides the user with the same tools that professionals count on.

The secret to great finishing is to keep the ironing table dry by removing the steam from the fabric. Use vacuum for pressing a shirt or putting in a crease, while up-air (blowing) is great for delicates, removing the risk of leaving an impression or crushing the nap.

FEATURES:
• Usable from either side of the table
• Height adjustable - 30.5” - 38.5”
• Quick-Dry textured polyester cover set
• 16" x 48.5" pressing dimensions
RELIABLE C81
$499
Reliable BARRACUDA 2000U-33 $599.00
The Barracuda zig-zag and straight stitch portable walking-foot machine is remarkably versatile. Designed for boat owners, hobbyists, and small businesses, the Barracuda is ideal for medium- to heavy-weight sewing jobs.  With a stitch quality comparable to an industrial machine, there’s no job too big for the Barracuda. With top and bottom feeding, it produces a perfect, even stitch, even when sewing over challenging materials.
FEATURES:
  • Stitch width (0-5mm) adjustment lever
  • Up to 4 stitches per inch
  • Sews Sunguard UVR Bonded Polyester thread and #69 nylon
  • Up to 12 mm foot clearance (upon request only)
  • Toothed belts and pulleys to prevent slippage
  • Type 135 x 17 needles, 135x16 for leather
  • All-metal construction
  • Weight: 34 Lb
  • 3 Year Warranty
T- LEG POWER STAND (KD) - $250 + freight

Includes steel frame, top and pedal
YAMATA 618 NEEDLE FEED, UNISON FEED, HEAVY DUTY UPHOLSTERY MACHINE @ $699 HEAD ONLY
$1099 w/option 1 stand. + PLUS FREIGHT
Head includes knee lift mechanism, drip pan, related machine items and accessories.( DROP SHIPPED DIRECT TO YOUR LOCATION)  We sell this head only because some customers are looking for a replacement head for their existing table.  We recomment these table upgrades.  Cheaper tables are available but not recommended.

Industrial Upholstery Sewing, suitable for the Sewing Leather Produce, Sportswear, Autocar Cushions, Nylon and Sailcloth Materials.  US Warranty 90 Days labor on defects in materials and workmanship.

Option 1:  $399 + FREIGHT (KD):  Custom K-LEG STAND WITH SERVO MOTOR, 618 TABLE TOP AND THREAD TREE

Option 2:  $599 + FREIGHT (assembled stand w/motor installed) We recommend you get this assembled:  DELUX H-LEG STAND WITH SERVO MOTOR, THREAD TREE, LED LAMP, RUBBER MACHINE SUPPORTS, WIDE RUBBER HINGE SUPPORT, MACHINE REST, DRAWER,BELT AND WHEELS.

- DROP SHIPPED TO YOUR LOCATION -
Reliable MSK-588 PORTABLE Blind Stitch MSK588 @ $399
(Same Tacsew T500) TAIWAN EyeGuard CylinderArm KneeLever SwingPlate 2:1SkipStitch.  MSK588 is the exact same machine from Huei Hwang Tony TAIWAN original blindstitch factory as Tacsew T500 which is $200 more. Reliable adds the needle eye guard for your safety.
Best used for:  Pants, skirts, dresses and drapery
Features:
  True skip stitch function with chain-off finger* (*required for drapery sheers and other light work)
  •    Allows the machine to skip every other stitch which reduces puckering on light-weight fabrics.
  •    Simple to use - easy to operate
  •    Adjustable stitch penetration. Modify the depth of the needle penetration; allows you to hem a wide variety of fabric types
  •    Knee activated frame drop for easy insertion and removal of the fabric.
  •    Adjustable thread tension
  •    4" Deep Swing-away plate for sewing flat pieces, converts to 2.5" cylinder freearm for tubular hems. Plate is 9" wide left to right
  •    1725 RPM Maximum speed
  •    0-7mm stitch length adjustment
  •    Maximum hem width of 3-1/4"
  •    36mm needle bar stroke
  •    8mm pressure foot lift
  •    1:1, 2:1 true skip stitch
  •    Variable speed foot controller
  •    Eye needle guard
  •    Built-in motor
  •    Sits on any table top - supplied with clamps (2)
  •    25lb net weight
  •    MSK-588 - made in Taiwan
  •    One year manufacturers warranty
  •    All Metal Casting
Reliable Blind Stitch
$399
YAMATA PORTABLE BLIND STITCH @ $349
Lightweight portable blind stitch w/ knee lift.  Easy reliable when used for light duty.  Excellent home sewing companion for operator looking for machine hemming.
Yamata Blind Stitch
$349
Juki LU1508NS Walking Foot Needle Feed Upholstery Sewing Machine
$2,600 + freight
Single needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook for Extra Heavy-weight Materials
Top M Bobbin, 16mm Lift, 9mm Stitch Length, Safety Clutch.  Power Stand w/Servo motor includes thread tree, LED Lite and drawer.
JUKI's unique feed mechanism promises excellent efficiency of feed. In addition to the standard models of 1-needle and 2-needle machines, other models intended for special purposes are available, including models for extra heavy materials and one having a thread trimmer. The machine is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity.
Dual-Tension Mechanism:
The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.
Juki DNU-1541S (w/ Safety Mechanism) @ $1899
Single Needle Unison Feed Lockstitch Industrial Machine - Double-capacity Hook.
Includes Fully Assembled Table and Clutch Motor (Servo Motor optional)
With its reliable feed and consistent seam quality, the machine responds outstandingly to the sewing of heavy materials.
With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness. The alternating vertical movements of the walking foot and presser foot are as large as 6.5mm. In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes. Thanks to this feature and the adoption of a new method of rectangular feed that prevents needle from fraying, the machine sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering.
NEEDLE SYSTEM:  135 x 17, sizes 14 - 24

The Juki Dnu-1541s allows users to complete sewing tasks quickly and efficiently. Equipped with a larger stroke with the needle bar, this needle-feed sewing machine provides users with more response and a smoother sewing session. In addition to an increased needle bar stroke of 36 mm, this Juki Dnu sewing machine allows users to experience a quick, clean session with its sewing speed of 2,500 stitches per minute. Different from a typical sewing machine, the Juki Dnu-1541s has a maximum stitch length of 9 mm and a special rectangular motion that is capable of handling various types of fabric. This needle-feed sewing machine can easily feed through thicker materials and has a rectangular-shaped feed to keep the needle from fraying. The Juki Dnu-1541s has an intuitively designed mechanism that includes a double tension feature that gives users up to 16 mm presser foot lift clearance by knee. The Juki Dnu sewing machine is ideal for those who are looking for a machine that ensures sewing projects go smoothly and quickly with no gathering or bunching.
CONSEW 206RB-1:  $1799 PLUS FREIGHT
Compound Walking Foot, Needle Feed, Straight Stitch
Single Needle with Large Bobbin
Includes:  Centralized Arm Lubrication, Reservoir-Oiled Hook with Micrometic Control Valve, Large Horizontal Axis Rotary Hook and Bobbin, Adjustable Reverse Feed, Locking Stitch Regulator, Safety ClutchHeavy Duty Industrial Stand:  Complete with industrial stand, table top and motor. (Assembly required).
TABLE Includes:  Thread tree, bobbin winder, head rest and drawer, clutch motor or servo motor.
NEEDLE SYSTEM:  135 x 17, sizes 14 - 24
Artisan 100-2:  $999 PLUS FREIGHT

A Single Needle Lockstitch Sewing Machine with Automatic Lubrication.  A100-2 For stitching light to medium weight fabric, knits, synthetics, vinyl, canvas, denim and coated and laminated material.  Suitable for attaching pockets to shirts, sewing collars and cuffs, stitching skirts, blouses, dresses, raincoats, general wearing apparelFeatures include a large Dial stitch length regulator and a large reverse lever handle for back tacking. The A-100-2 sewing machine may be the smoothest and quietest lockstitch on the market.  This machine runs very well at the slowest of operating speed up to very high performance with extremely low vibration or noise.  The Complete sewing machine from artisan includes our exclusive ACF-622 Electronic A.C. Servo Motor Stand Drive Unit with adjustable "T" style steel legs, thread tree, LED low voltage lamp, drawer and accessories.
NEEDLE SYSTEM:  16 x 231 *10 to *18
Artisan 797 AB-8001NS:  $1450 PLUS FREIGHT
13" long by 6" tall working area, walking Foot (Alternating Feed) Lockstitch Sewing Machine with a Big "M" size Bobbin and Rotating Hook, (end loading mechanism).  The new 797NS is equipped with a new style presser foot "Stepper" Mechanism designed to aid feeding over obstacles and heavy seams.  The 797NS has a hand presser Foot Lifting Lever located on front of machine.  Dial operated stitch length regulator, reverse feed lever with fully automatic lubrication and sews up to 3/8" thickness with thread from size 33 up to size 138. The power stand includes an ACF Electronic Servo Motor Stand Drive Unit with adjustable "T" style steel legs, thread tree, LED low voltage 27" gooseneck lamp, drawer and accessories.
For sewing medium to medium-heavy weight materials such as cloth, synthetics, vinyl, canvas, leather and various coated and laminated materials. Suitable for stitching operations on such products as leather coats, jackets, gloves, belts, wallets, handbags, briefcases and other travelware accessories, canvas products, auto and boat covers and tops, upholstery.
NEEDLE SYSTEM:  135 x 17, size 14 - 24
Artisan 4420 RB @ $2550 + Freight
Two Needle, High Speed, Compound Needle Feed, Walking Foot (Unison Feed) Lockstitch Sewing Machine with Large "U" size Bobbins and Rotating Hooks, (Top loading mechanism).  Features include a Safety Clutch mechanism, dial operated stitch length regulator, reverse feed lever, automatic lubrication and sews up to 3/8" thickness. The adjustable "T" leg power stand includes an ACF-622 Electronic A.C. Servo Motor, thread tree, LED low voltage lamp, drawer and accessories.  This model can use heavy duty threads, sizes 207 to 277 threads.

Needle System:  135 x 17, size 14 - 24
email me
ÜBERLIGHT 9000C
$99.95
email me
New Portable Coverstitch Yamata GK257-B 2-Needles NEW machine @ $199
This coverstitch machine looks like an early model babylock serger with no cutter.  These machines use two-three needles to produce parallel rows of top stitching with a lower looper that creates the cover hem.  These machines are unique as portables and generally are pricy commercial machines.  Janome has newly designed models selling for $400 or more.  The Yamata is a cheap startup for the customer experimenting with cover hems.  These models use a unique needle system.  Make sure you stock up when you buy one.
New Yamata Coverstitch
$199
Juki MO-6716:   5/Thread High-speed Overlock w/ Table & Variable Speed Servo Motor @ $1999 (assembled)
$1899 w/ Clutch motor
(Stand comes assembled and delivery to your Napa location Included)
A general-purpose advanced machine that responds to various kinds of sewing materials and processes.
The MO-6700S Series responds to various kinds of sewing materials and processes, producing delicate and beautiful soft-to-the-touch seams while further reducing operating noise as well as increasing durability. This is a highly advanced cost-effective machine.
The newly adopted upper and lower needle bar bushings of the needle bar mechanism improve both the durability and reliability of the needle bar unit. The machine comes standard with a cartridge type oil filter and cooling fan for further improved reliability and durability.
The machine has been developed with the intention of providing an extended service life.
The machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio, which can be easily adjusted to finish seams that perfectly match the material to be used. Comfortable operation is all but guaranteed, by a wider area around the needle entry, the adoption as standard of a micro-lifter feature that offers improved responsiveness to materials and provides the operator with upgraded operability, and by the reduction of operating noise and vibration, which has been achieved by designing an optimally balanced machine.
Juki MO-6716-5
$1999w/ servo
Motor Options
With so many options available for motors when we talk about replacing or buying a motor for our industrial sewing machine, there is one important point to keep always in mind "The Speed". Regardless of brand or price, motors come in two different configurations:
1. Fixed-Speed Clutch Motor
2. Adjustable-Speed Servo Motor
Clutch motors operate at a fixed speed, typically between 1725 - 3450 rpm, depending on the type of machine. Servo Motors on the other hand are speed adjustable. The two major advantages of the Servo Motor are that you can control the speed of the motor and that the motor is completely silent when the pedal is not engaged.
Some other advantages of the Servo Motor include:
  • They consume up to 90% less energy than clutch motors
  • 1/3 lighter than clutch motors
  • Reverse motor rotation with the flick of a switch
  • Nothing to wear or adjust
  • Adjusted speed remains the same no matter how hard the pedal is pressed
  • Most of our customers find that the sewing machine is much easier to control with a Servo motor because of the speed control. This is especially helpful for beginner sewers but also for projects that simply don't require high speed stitching.
Skiving machine application video:  http://youtu.be/j6SDHlOgffs
Skiving machine application video:  http://youtu.be/j6SDHlOgffs
New Juki DDL-8700 1-needle, Lockstitch Machine:  $1149
By thoroughly investigating and modifying the sewing mechanisms in order to achieve low-tension sewing, the machine flexibly responds to various kinds of materials and produces beautiful seams of consistent quality.
Reliable MSK-1341B:  $2,299.00
CYLINDER BED WALKING FOOT
For medium to heavy weight fabric that requires a regular sized cylinder bed (70 mm diameter) we recommend the MSK-1341B with top and bottom feed a high-pressure foot lift and a longer stitch length.
FEATURES:
• 2,000-RPM high-speed operation
• Japanese large capacity hook
• Safety clutch
• 16 mm foot lift (knee)
• Manual lubrication
• Instruction / parts manual included
• Tool kit, drawer, thread stand included
• Individually tested and sewn-off before shipping
Reliable Servo Motors
Reliable portable blind stitch threading instructions.
Skiving machine demonstration.
Installing a needle in the Reliable blind stitch.
Skip stitch blind stitch application.
Barracuda:  Inserting and threading the needle.
Barracuda - not stitching?
Barracuda - Winding the bobbin.
Reliable Superior Stand
Others skimp on the stand components, we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our K-legs are made from heavy-duty 3/32" steel.
Reliable SewQuiet Servo Motor
Getting the performance you want out of a sewing machine requires the right motor. We only use the best, the industry's #1 SewQuiet 5000 brushless DC servomotor.
28"x60" Commercial table with led uberlight, wheels and drawer:  $799 - $1499
Also available in 24x60 or 24x48 with or without wheels and/or light and drawer.

Please submit your brand and model number, size and specifications for a price quotation.
Left, is a blank top.  These tables have adjustable legs and can be fixed at most heights suitable for using a chair, stool or standing positon. (up to 42"high w/casters).  These are universal industrial duty tables that can be customized to fit any domestic sewing machinge.  They're the basic raw unit used to build an industrial sewing machine stand.  Key commercial stand components are package with the sewing machine head.
email me
Jack JK-T04 Peletera - Fur Sewing Machine